Description
Smooth operation and productive cutting at the stump. The SC70TX is tough enough to withstand large stumps on a commercial jobsite and can fit into tight spaces in a residential area. The track system is designed to decrease ground disturbance. The SC70TX is equipped with safety features such as the patented capacitance-sensing operator presence system and wheel brake to help you feel confident on the job.
| Feature | Benefit |
| Zero turning radius | |
| Two individually controlled tracks allow for counter-rotation steering, resulting in a zero turning radius. | A zero turning radius increases maneuverability on confined jobsites. |
| Planetary track drive | |
| The SC70TX is equipped with a planetary track drive system and variable-width rubber tracks. | The track drive system provides maneuverability, flotation in soft soil and mobility in difficult jobsite conditions. |
| Gearbox drive cutter wheel system | |
| Horsepower from the engine is transferred through an upper gearbox down a dampened driveshaft and into the lower gearbox connected to the cutter wheel. | This system directs the maximum amount of horsepower to the cutter wheel. There is no sideload on engine and unlike a belt drive, there are no belts to adjust or align. |
| SmartSweep™ control system | |
| SmartSweep™ control system ushers in the next generation in cutter wheel sweep control technology by monitoring engine load and providing continuous feedback resulting in a smooth and consistent cutter wheel sweep rate. | This feature helps improves efficiency and productivity at the stump while helping to minimize wear and tear on the machine. |
| Electric-over-hydraulic controls | |
| Electric activation of hydraulic components with the touch of a lever or button. Hydraulic valves have diagnostic test ports for quick diagnosis | This control style increases the operator’s ability to feather controls in tight areas around stumps, houses and gates. This gives you good controllability of the track drive during loading/unloading on trailer. |
| Electronic throttle | |
| The engine throttle level is automatically regulated by the processor. The clutch engage function- will only occur once the engine rpm has been reduced to low idle. | The electronic throttle prevents engagement of the clutch at high rpm which can cause premature wear to the clutch. |
| Yellow JacketTM cutter system | |
| The SC70TX is equipped with Vermeer-exclusive Yellow Jacket system stump cutter teeth. | The Yellow Jacket cutter system is designed to provide fast, convenient serviceability, as well as extended pocket and tooth life. |
| Plastic hood enclosure | |
| The engine compartment is enclosed by a rugged plastic hood enclosure with reinforced steel skeleton. | The lockable hood enclosure protects critical components from the elements and vandalism, while helping reduce noise levels. |
| Optional remote control | |
| The optional radio remote controls allows operation of most machine functions without the need to stand at the swing-out control station. | The remote control feature provides flexibility during operation and transport applications. |
| Operator presence system | |
| The SC70TX is equipped with two operator-sensing control levers that monitor the operator’s touch and maintain cutter wheel engagement. When the operator’s hands leave the control levers, an automatic disengage and braking sequence will stop the cutter wheel. | With this system, the cutter wheel will automatically stop when the operator releases the hydraulic cutter wheel controls. |
| Ground drive speed | |
| The SC70TX has more than 20 percent increased ground drive speed over The SC60TX stump cutter. | With the fast ground drive speed, transporting the machine between stumps will help increase productivity. |