The RTX200 pedestrian trencher can handle tough challenges on your jobsite.
The RTX200 is equipped with a 20.5-hp (15.3-kW) Kohler engine to provide high-powered digging torque and a maximum trenching depth of 36 in (91.4 cm). Because of the intuitive and enhanced VZ steering capabilities, the operator can work through difficult and uneven terrains. At 35-in (88.9-cm) wide, this unit is able to fit through tight spaces such as a typical backyard gate. Offered with the option of tires or tracks, this machine can handle a variety of terrains and jobsites.
| DIMENSIONS | |
|---|---|
| Height: | 46 in ( 116.8 cm ) |
| Weight (Tractor with Tires) | 940 lbs ( 426.4 kg ) |
| Width (Over Rubber Tires) | 35 in ( 88.9 cm ) |
| Width (Over Rubber Tracks) | 35 in ( 88.9 cm ) |
| Wheel Base From Centerline of Axles | 33.2 in ( 84.3 cm ) |
| Length (Tractor with Tires) | 83 in ( 210.8 cm ) |
| Tread Width with Rubber Tires (Centerline to Centerline) | 8.5 in ( 21.6 cm ) |
| Length (Minimum Transport attachment) | 89 in (226.1 cm) |
| TANK CAPACITY | |
|---|---|
| Engine Oil | .5 gal ( 1.9 L ) |
| Fuel tank: | 2.5 gal ( 9.5 L ) |
| Hydraulic tank: | 10.8 gal ( 40.7 L ) |
| Hydraulic System | 11.3 gal ( 42.6 L ) |
| ENGINE (OPTION 1) | |
|---|---|
| Make and model v1: | Kohler CH640 |
| Fuel type | Gasoline |
| Horsepower at Maximum RPM (Gross) | 20.5 hp ( 15.3 kw ) |
| Displacement | 41.1 cu-in ( .7 L ) |
| Cooling Medium v1 | Forced Air |
| Maximum Operating Angle (Fore/Aft)* v1 | 25° |
| Maximum Operating Angle (Left/Right)*v1 | 25° |
| Aspiration v1 | Natural |
| GROUND DRIVE | |
|---|---|
| Maximum Forward Transport Speed at Full Throttle | 3.1 mph ( 5 km/h ) |
| Maximum Reverse Transport Speed at Full Throttle | 1 mph ( 1.6 km/h ) |
| HYDRAULIC SYSTEM | |
|---|---|
| Attachment Pump gpm at Maximum Engine RPM | 10.3 gpm ( 39 L/min ) |
| Attachment Pump Relief Pressure (Trencher/Forward) | 2500 psi ( 172.4 bar ) |
| Ground Drive Pump gpm at Maximum Engine RPM | 5.4 gpm ( 20.4 L/min ) |
| Ground Drive Pump Relief Pressure Forward/Reverse | 2400 psi ( 165.5 bar ) |
| ATTACHMENT | |
|---|---|
| Model Name | TR200 |
| Drive type: | hydraulic motor |
| Length (Minimum Transport attachment) | 89 in (226.1 cm) |
| Maximum Trench Depth | 36 in (91.4 cm) |
| Maximum Trench Width | 6 in (15.2 cm) |
| Minimum Trench Width | 4 in (10.2 cm) |
